|
Welcome to
|
 |
Back 
Visit JohnDeere.com 
Contact Us
|
||
|
|
Welcome to
|
|
|
Back
Visit JohnDeere.com
Contact Us
|
||
Store Information |
||||
|
VACIN INC.
P.O. BOX 188 26803 467 ST HUMPHREY, NE 68642 |
JESS SCHURE MICHAEL LYNCH Phone : (402) 923-0606  JESSRS@VACININC.COM
|
|||
| View all our locations | ||||
Category : Combine Cutting Platforms (Change Category) |
|||
| John Deere 218 - Combine Cutting Platforms
** 18' FLEX HEADER WITH $3,000. RECENTLY SPENT RECONDITIONING ** NICE HEADER ** Platform Type: Flexible, Size (feet): 18 - Updated Thursday, February 9, 2012 |
$3,000 US Hours: - |
HUMPHREY, NE, USA | |
| 2010 John Deere 625 - Combine Cutting Platforms
Build Codes 1315 AUGER COMPOSITE FINGERS 6705 LESS TEM SRFC/CORROSION PROT 7644 SPRKNF LG/SHRT COARSE TOOTH 7720 LONG/SHORT COURSE SECTIONS 9979 AUGLFLGHT&REAR STRP EXTEN Platform Type: Flexible, Size (feet): 25 - Updated Thursday, February 9, 2012 |
$28,000 US Hours: - |
HUMPHREY, NE, USA | |
| 2011 John Deere 625 - Combine Cutting Platforms
Build Codes 1315 AUGER COMPOSITE FINGERS 6705 LESS TEM SRFC/CORROSION PROT Platform Type: Flexible, Size (feet): 25 - Updated Thursday, February 9, 2012 |
$30,500 US Hours: - |
HUMPHREY, NE, USA | |
| 2010 John Deere 630 - Combine Cutting Platforms
Build Codes 1315 AUGER COMPOSITE FINGERS 6705 LESS TEM SRFC/CORROSION PROT 7640 SPARE KNIFE COURSE TOOTH 7720 LONG/SHORT COURSE SECTIONS Platform Type: Flexible, Size (feet): 30 - Updated Thursday, February 9, 2012 |
$32,000 US Hours: - |
HUMPHREY, NE, USA | |
| John Deere 630 - Combine Cutting Platforms
Build Codes 1315 AUGER COMPOSITE FINGERS 6705 LESS TEM SRFC/CORROSION PROT 7640 SPARE KNIFE COURSE TOOTH 7720 LONG/SHORT COURSE SECTIONS Size (feet): 30 - Updated Thursday, February 9, 2012 |
$32,000 US Hours: - |
HUMPHREY, NE, USA | |
| 2008 John Deere 630 - Combine Cutting Platforms
Build Codes 1315 AUGER COMPOSITE FINGERS 7644 SPRKNF LG/SHRT COARSE TOOTH 7710 LONG/SHORT COURSE SECTIONS Platform Type: Flexible, Size (feet): 30 - Updated Thursday, February 9, 2012 |
$28,900 US Hours: - |
HUMPHREY, NE, USA | |
| 2009 John Deere 630 - Combine Cutting Platforms
Build Codes 1315 AUGER COMPOSITE FINGERS 7720 LONG/SHORT COURSE SECTIONS Platform Type: Flexible, Size (feet): 30 - Updated Thursday, February 9, 2012 |
$31,000 US Hours: - |
HUMPHREY, NE, USA | |
| 2009 John Deere 630 - Combine Cutting Platforms
Build Codes 1315 AUGER COMPOSITE FINGERS 7195 TEMP RUST/CORROSION PROTECT 7720 LONG/SHORT COURSE SECTIONS Platform Type: Flexible, Size (feet): 30 - Updated Thursday, February 9, 2012 |
$32,000 US Hours: - |
HUMPHREY, NE, USA | |
| John Deere 635 - Combine Cutting Platforms
** 35' FLEX HEADER ** Platform Type: Flexible, Size (feet): 30 - Updated Thursday, February 9, 2012 |
$33,000 US Hours: - |
HUMPHREY, NE, USA | |
|
John Deere 635F - Combine Cutting Platforms
AUGER COMPOSITE FINGERS 1420 HH SENSING AND CONTOUR SENSR 2010 SPLINED BACKSHFTS/UNIV TELSP 9970 STUBBLE LIGHTS Platform Type: Flexible - Updated Saturday, December 3, 2011 |
$28,500 US Hours: - |
HUMPHREY, NE, USA |
|
2006 John Deere 635F - Combine Cutting Platforms
AUGER COMPOSITE FINGERS 1510 LOW STONE DAM 2010 SPLINED BACKSHFTS/UNIV TELSP 7710 LONG/SHORT KNIFE 35'F Platform Type: Flexible - Updated Saturday, December 3, 2011 |
$27,500 US Hours: - |
HUMPHREY, NE, USA |
|
John Deere 635F - Combine Cutting Platforms
1315 AUGER COMPOSITE FINGERS 7644 SPRKNF LG/SHRT COARSE TOOTH 7690 RAISED CUT HGHT SKID SHOES 7710 LONG/SHORT COURSE SECTIONS Platform Type: Flexible - Updated Saturday, December 3, 2011 |
$29,500 US Hours: - |
HUMPHREY, NE, USA |
| 1990 John Deere 915 - Combine Cutting Platforms
Size (feet): 15 - Updated Thursday, February 9, 2012 |
$6,500 US Hours: - |
HUMPHREY, NE, USA | |
| 1991 John Deere 915 - Combine Cutting Platforms
Build Codes 2095 LESS WARNING LAMPS 9950 AUTO REEL SPEED-FLEX Platform Type: Flexible, Size (feet): 15 - Updated Thursday, February 9, 2012 |
$6,500 US Hours: - |
HUMPHREY, NE, USA | |
|
John Deere 920 - Combine Cutting Platforms
FRAUNDORFER TRADE IN ** Platform Type: Flexible, Size (feet): 20 - Updated Tuesday, October 18, 2011 |
$6,000 US Hours: - |
HUMPHREY, NE, USA |
|
1998 John Deere 920 - Combine Cutting Platforms
2001 TILT CONTOUR MST/SIDEHILL 7600 DAIL-A-SPEED REEL CONTROL 7610 20'HYD FORE/AFT REEL CONTROL 7615 CONTOUR MASTER SENS/HARNESS 7620 20' BOTTON POLY-SKID PLATES Platform Type: Flexible, Size (feet): 20 - Updated Sunday, October 16, 2011 |
$10,500 US Hours: - |
HUMPHREY, NE, USA |
| 2003 John Deere 922 - Combine Cutting Platforms
Build Codes 1310 FLEX--FULL FINGER AUG 1504 ADV DAM HGHT CNTRL C MASTER 2010 UNIV SPLNDED BCKSHFTS/TELESP Platform Type: Flexible, Size (feet): 22 - Updated Thursday, February 9, 2012 |
$14,500 US Hours: - |
HUMPHREY, NE, USA | |
| 2001 John Deere 925 - Combine Cutting Platforms
Build Codes 1310 FLEX--FULL FINGER AUG 1510 DAM HDR HGHT CNTL W/O SENSOR 2010 UNIV SPLNDED BCKSHFTS/TELESP 9970 STUBBLE LIGHTS 9988 FLEX HEIGHT INDICATOR Platform Type: Flexible, Size (feet): 25 - Updated Thursday, February 9, 2012 |
$13,500 US Hours: - |
HUMPHREY, NE, USA | |
| 1997 John Deere 925 - Combine Cutting Platforms
Build Codes 2000 LEVEL LAND OPT 7600 DIAL-A-SPEED REEL CONTROL 7610 25'HYD FORE/AFT REEL CONTROL 7620 25' BOTTOM POLY-SKID PLATES Platform Type: Flexible, Size (feet): 25 - Updated Thursday, February 9, 2012 |
$8,950 US Hours: - |
HUMPHREY, NE, USA | |
| John Deere 925 - Combine Cutting Platforms
Build Codes 2000 LEVEL LAND OPT 7600 DIAL-A-SPEED REEL CONTROL 7620 25' BOTTOM POLY-SKID PLATES Platform Type: Flexible, Size (feet): 25 - Updated Thursday, February 9, 2012 |
$10,500 US Hours: - |
HUMPHREY, NE, USA | |
| John Deere 930 - Combine Cutting Platforms
Build Codes 1310 FLEX--FULL FINGER AUG 1504 ADV DAM HGHT CNTRL C MASTER 2010 UNIV SPLNDED BCKSHFTS/TELESP 7600 DIAL-A-SPEED REEL CONTROL 7610 30'HYD FORE/AFT REEL CONTROL 7620 30' BTM POLY-SKID PLATES Platform Type: Flexible, Size (feet): 30 - Updated Thursday, February 9, 2012 |
$10,000 US Hours: - |
HUMPHREY, NE, USA | |
|
2000 John Deere 930F - Combine Cutting Platforms
- Updated Thursday, May 26, 2011 |
$11,000 US Hours: - |
HUMPHREY, NE, USA |
|
Mac Don 974 - Combine Cutting Platforms
** 36' MAC DON DRAPER HEADER ** ALSO COME WITH ADAPTOR TO FIT CASE IH COMBINES ** UNIT IS IN VERY NICE CONDITION Platform Type: Draper, Size (feet): 36 - Updated Saturday, May 28, 2011 |
$35,000 US Hours: - |
HUMPHREY, NE, USA |
 |
|||||||||||||
|
|
|
|
|
|
||||||||
|
|
|
|
||||||||||
|
|||||||||||||
