John Deere

Welcome to
C & B OPERATIONS, LLC

 MachineFinder
Back   Visit JohnDeere.com   Contact Us

Store Information
Show all dealer location details

Category : Tillage (Change Category)

Category
 Manufacturer
 Model
 Text Search
2004 Sunflower 1434 - Tillage
36', TANDEM DISK , FRONTS MEASURE 21.5" AND WILL BE NEW, BACK MEASURE 22", 9" SPACING FRONT AND REAR, HAS 3 BAR HARROW, NO REAR HITCH, HYD FORE/AFT, LESS HYD WING CONTROL, , WALKING TANDEMS ON MAINFRAME, WALKING TANDEMS ON WINGS, HAS SCRAPERS, C SPRING STANDARDS, CONE BLADES, LOCAL, ONE OWNER TRADE, HAS ALL SAFETY EQUIPMENT, HAS OP MANUAL, NO WARRANTY. AVAILABLE: WHEN NEW DISK COMES IN SU#133046
Subcategory: Disk, Width (feet): Other, Disk Blade (inches): 24, Standard: C Shank - Updated Wednesday, January 4, 2012 		$36,500 US
Hours: - 		MILLER, SD, USA
2005 Sunflower 1434 - Tillage
"33', TANDEM DISK, FRT 22.85 REAR 23.2, 9""F / 9""R SPACING, 3 BAR HARROW, HYD FORE/AFT, NO HYD WING CONTROL, SINGLE POINT DEPTH, WALKING TANDEMS ON MAINFRAME, WALKING TANDEMS ON WINGS, RIGID SCRAPERS, C SPRING GANG STANDARDS, SPHERICAL BLADES
- Updated Thursday, February 9, 2012 		$39,500 US
Hours: - 		FREEMAN, SD, USA
Sunflower 1435 - Tillage
38', TANDEM DISK, 24 INCHES WHWEN NEW, 9"/9" BLADE SPACING, 3 BAR HARROW, NO REAR HITCH, HYD. FORE AND AFT, HYD. WING CONTROL, SINGLE POINT DEPTH CONTROL, DUALS ON MAIN FRAME AND WINGS, WALKING TANDEMS, SCRAPERS, C SPRING STANDARDS, SPHERICAL BLADES, PAINT AND FRAME QUALITY :7, MECHANICAL CONDITION:6 , LOCAL TRADE IN, ONE OWNER, OPERATORS MANUAL, NO WARRANTY. STOCK #131630
Subcategory: Disk, Width (feet): Other, Disk Blade (inches): 24, Standard: C Shank - Updated Tuesday, December 13, 2011 		$39,500 US
Hours: - 		YANKTON, SD, USA
2010 Sunflower 1435-30 - Tillage
30', TANDEM DISK, 23.75", 8.75" SPACING, HARROW, HYDRAULIC LEVELING, SINGLE POINT DEPTH CONTROL, WALKING TANDEM ON ALL WHEELS, RIGID SCRAPERS, C SPRING STANDARDS, SPHERICAL BLADES, PAINT & FRAME QUALITY 9, MECHANICAL CONDITION: 9, ONE OWNER, LOCAL TRADE, ALWAYS SHEDDED, SAFETY EQUIPMENT(SMV, WARNING LIGHTS, SHIELDS, LIGHTS), OPERATORS MANUAL. STOCK #133456
Subcategory: Disk, Width (feet): 30, Disk Blade (inches): 24, Standard: C Shank - Updated Friday, January 6, 2012 		$49,500 US
Hours: - 		FREEMAN, SD, USA
2002 John Deere 2200 - Tillage
60FT, 5 SECTION, 5 SECTION, FLOATIN HITCH, TRU POSITION STANDARDS, 200 LB TRIP, 7" SPACING, ACCUDEPTH, 3 BAR HARROW, CASTER GAUGE WHEELS, 7" SWEEPS BOLT ON, TANDEMS ALL ACROSS, LOCAL TRADE, 15FT MAINFRAME, 121 STANDARDS, NO WARRANTY. AVAILABLE: DECEMBER 1, 2011 SU#128074
Subcategory: Field Cultivator, Width (feet): Other, Points: 7 Inch Sweep, Standard: C Shank - Updated Tuesday, November 8, 2011 		$44,000 US
Hours: - 		ROSCOE, SD, USA
2002 John Deere 2200 - Tillage
49'6" WIDTH, 5 SECTION, 5 SECTION FRAME, FLOATING HITCH, TRU POSITION STANDARDS, 200# TRIP FORCE, 9" SPACING, ACCUDEPTH DEPTH CONTROL, 3 BAR TINE HARROW, 6 CASTERING GUAGE WHEELS, 7" PERMA-LOC SWEEPS, WALKING TANDEMS ON MAINFRAME AND WINGS, PAINT/FRAME QUALITY: 7, MECHANICAL COND: 7, 12' MAINFRAME, 66 STANDARDS, SMV, WARNING LIGHTS. STOCK #130265
- Updated Friday, December 30, 2011 		$45,000 US
Hours: - 		PIPESTONE, MN, USA
2005 John Deere 2210 - Tillage
63'9", 5 SECTION, FLOATING HITCH, TRU POSITION 200 LB STANDARDS, 9" SPACING, ACCUDEPTH, 4 BAR HARROW, 10" PERMALOC SWEEPS, PAINT/FRAME 8, MECHANICAL 8, LOCAL TRADE, 15FT MAINFRAME, 87 SHANKS, STOCK #106052
Subcategory: Field Cultivator, Width (feet): Other, Points: 10 Inch Sweep, Standard: Spring Reset - Updated Saturday, August 20, 2011 		$52,500 US
Hours: - 		PIPESTONE, MN, USA
2008 John Deere 2210 - Tillage
48.5 FEET, 5 SEC FOLD, LOW TRANSPORT,FLOATING HITCH, TRU POSITION STANDARDS, 200# TRIP FORCE, 9' SPACING, ACCU DEPTH CONTROL LESS DISPLAY, 4 BAR REAR COIL TINE HARROW, PERMALOC SWEEP, TANDEM WALKING WHEELS - MAINFRAME, WINGSH, PAINT & FRAME QUALITY: 8, MECHANICAL CONDITION:8, ONE OWNER, SHEDDED,LOCAL TRADE, 15' MAIN FRAME, 65 STANDARDS, SAFETY EQUIPMENT (SMV, WARNING LIGHTS, SHIELDS, LIGHTS), OPERATORS MANUAL, AVAILABLE:APPOX APRIL 2012. STOCK #131141
- Updated Friday, January 20, 2012 		$48,900 US
Hours: - 		TRUMAN, MN, USA
2011 John Deere 2210 - Tillage
53'6", 5 SECTION, FLOATING HITCH, TRU POSITION STANDARDS, 200# TRIP FORCE, 6" SPACING, ACCUDEPTH, 4 BAR HARROW, 7" PERMA-LOC SWEEPS, WALKING TANDEMS ON MAINFRAME AND WINGS, PAINT AND TIN IS 8 OF 10, MECHANICAL CONDITION IS 8 OF 10, ONE OWNER LOCAL TRADE, 12' MAINFRAME, 107 STANDARDS, OPERATORS MANUAL,AVAILABLE: JAN 2012. STOCK #124403
Subcategory: Field Cultivator, Width (feet): Other, Points: 7 Inch Sweep, Standard: C Shank - Updated Tuesday, January 3, 2012 		$71,056 US
Hours: - 		PIPESTONE, MN, USA
2007 John Deere 2210 - Tillage
26.5, 3 SECTION, 3 SECTION, LEVEL LIFT, TRU POSITION, 150 LB STANDARDS, 6", SINGLE POINT, 4 BAR COIL TINE HARROW, NO GAUGE WHEELS, 7" BOLT ON SWEEPS, TANDEM WALKING WHEELS ON MAINFRAME AND WINGS, PAINT & FRAME QUALITY - 8, MECHANICAL CONDITION - 8, 12' MAINFRAME, 53 SHANKS, APPROX 4000 ACRES, ALL SAFETY ITEMS IN PLACE, OPERATORS MANUAL INCLUDED, ONE OWNER, LOCAL TRADE, LOW ACRES, PREMIUM USED MACHINE, VERY CLEAN. STOCK #134803
Subcategory: Field Cultivator, Points: 7 Inch Sweep, Standard: C Shank - Updated Friday, February 3, 2012 		$24,500 US
Hours: - 		PIPESTONE, MN, USA
2010 John Deere 2310 - Tillage
45' 9", 5 SECTION, LEVEL LIFT, 200 LB TRU POSITION STANDARDS, 9" SPACING, SINGLE POINT, 5 BAR HARROW, CASTERING GAUGE WHEELS, 10" PERMALOC SWEEPS, TANDEM WALKING WHEELS ON MAINFRAME & WINGS, PAINT/FRAME 9, MECH COND 9, ONE OWNER, LOCAL TRADE, ALWAYS SHEDDED, 12' MAIN FRAME, 62 STANDARDS, AVAILABLE FEB OF 2012. STOCK #123842
- Updated Wednesday, August 10, 2011 		$78,500 US
Hours: - 		PIPESTONE, MN, USA
John Deere 235 - Tillage
25" WORKING WIDTH, RIGID DISK, 21.5" DISK BLADES, 9/11" DISK SPACINGS, NO REAR ATTACHMENT, NO REAR HITCH, MANUAL CRANK FOR/AFT ADJUSTMENT, HYDRAULIC WING CONTROL, CYLINDER STOP DEPTH CONTROL, WALKING TANDEMS ON MAINFRAM, SINGLE WHEELS ON WINGS, DISK SCRAPERS, RIGID DISK STANDARDS, SPHERICAL BLADES.STOCK #124419
Subcategory: Disk, Width (feet): 25, Disk Blade (inches): 22, Points: None, Standard: N/A - Updated Friday, January 13, 2012 		$9,500 US
Hours: - 		LUVERNE, MN, USA
2002 John Deere 2400 - Tillage
52', 12' CENTER, FLOATING HITCH, 52- 28" TRUPOSITION STANDARDS, 550# TRIP FORCE ON 12" SPACING W/16" SWEEPS, ACCU DEPTH FOR TRACTORS OTHER THAN JD 9000 W/OPEN CENTER, NO HARROWS, CENTER SECTION HAS CASTERING FRONT 11L-15 W/ 12.5-15 WALKOVER, INSIDE WING HAS CASTERING FRONT 11L-15 W/ 11L-15 WALKOVER, OUTER WING HAS CASTERING FRONT 9.5L-15 W/ 9.5L15 SINGLE. WARNING LIGHTS, SMV SIGN, OPERATORS MANUAL. STOCK #134427
Subcategory: Chisel Plow, Width (feet): Other, Points: 16 Inch Sweep, Standard: C Shank - Updated Tuesday, January 24, 2012 		$33,500 US
Hours: - 		BILLINGS, MT, USA
2010 John Deere 2410 - Tillage
33', 3 SECTION 15' MAINFRAME, FLOATING HITCH, 25 SHANKS, TRU DEPTH, 1250# TRIP FORCE, 16" SPACINGS, ACCUDEPTH CONTROL, CASTERING GUAGE WHEELS, NO POINTS, TANDEM WALKING WHEELS, LESS NH3 COMPONENTS, LESS REAR HITCH AND TOOL BOX, PAINT & FRAME QUALITY: 9, MECHANICAL CONDITION:9, COOP OWNED, USED FOR NH3 APPLICATIONS, QUESTIONS CALL RICK 712-298-0592, SAFETY EQUIPMENT (SMV, WARNING LIGHTS, SHIELDS, LIGHTS), OPERATORS MANUAL. STOCK #133817
Subcategory: Chisel Plow, Width (feet): Other, Points: None, Standard: Spring Reset - Updated Thursday, January 19, 2012 		$34,000 US
Hours: - 		TRUMAN, MN, USA
2009 John Deere 2410 - Tillage
33', 3 SECTION, FLOATING HITCH, 25 SHANKS, TRU DEPTH, 1250# TRIP, 16" SPACING, SINGLE POINT DEPTH CONTROL, CASTERING FRONT WHEELS 9.5LX15, TANDEM WALKING REAR WHEELS 11LX15, SPIKE POINTS, NO OUTER FRAME EXTENSIONS SHOWN IN PICTURE, PAINT, FRAME, MECHANICAL CONDITION 8 - CALL GIL 507-236-4731. STOCK #134789
Subcategory: Chisel Plow, Width (feet): 32, Points: Chisel Points, Standard: Spring Reset - Updated Thursday, February 2, 2012 		$33,900 US
Hours: - 		ST. JAMES, MN, USA
2010 John Deere 2410 - Tillage
33', 3 SECTION 15' MAINFRAME, FLOATING HITCH, 25 SHANKS, TRU DEPTH, 1250# TRIP FORCE, 16" SPACINGS, ACCUDEPTH CONTROL, CASTERING GUAGE WHEELS, NO POINTS, TANDEM WALKING WHEELS, PAINT & FRAME QUALITY: 9, MECHANICAL CONDITION:9, COOP OWNED, USED FOR NH3 APPLICATIONS, QUESTIONS CALL RICK 712-298-0592, SAFETY EQUIPMENT(SMV, WARNING LIGHTS, SHIELDS, LIGHTS), OPERATORS MANUAL. STOCK #133819
Subcategory: Chisel Plow, Width (feet): Other, Points: None, Standard: C Shank - Updated Thursday, January 19, 2012 		$34,000 US
Hours: - 		TRUMAN, MN, USA
2010 John Deere 2410 - Tillage
33', 3 SECTION 15' MAINFRAME, FLOATING HITCH, 25 SHANKS, TRU DEPTH, 1250# TRIP FORCE, 16" SPACINGS, ACCUDEPTH CONTROL, CASTERING GUAGE WHEELS, NO POINTS, TANDEM WALKING WHEELS, LESS NH3 COMPONENTS, LESS REAR HITCH AND TOOL BOX, CALL RICK WITH QUESTIONS 712-298-0592, PAINT & FRAME QUALITY: 9, MECHANICAL CONDITION:9, COOP OWNED, USED FOR NH3 APPLICATIONS, SAFETY EQUIPMENT (SMV, WARNING LIGHTS, SHIELDS, LIGHTS), OPERATORS MANUAL. STOCK #133816
Subcategory: Chisel Plow, Width (feet): Other, Points: None, Standard: Spring Reset - Updated Thursday, January 19, 2012 		$34,000 US
Hours: - 		TRUMAN, MN, USA
2007 John Deere 2410 - Tillage
33' 8", 3 SECTION, FLOATING HITCH, 25 SHANKS, TRU DEPTH STDS, 16" SPACING, SINGLE POINT DEPTH CONTROL, SPIKE POINTS, TANDEM WHEELS MAIN AND WINGS, CONDITION 8, CALL GIL 507-236-4731. STOCK #127699
- Updated Sunday, November 27, 2011 		$33,500 US
Hours: - 		ST. JAMES, MN, USA
2008 John Deere 2410 - Tillage
46' WORKING WIDTH, 5 SECTION, FLOATING HITCH, 46 STANDARDS, 28" TRU POSITION STANDARDS, 550# TRIP FORCE, 12" SPACING, ACCUDEPTH DEPTH CONTROL SYSTEM, 240 HARROW 3 BAR REAR ATTACHMENT, 6 CASTERING GAUGE WHEELS, 16" SWEEP TRU WIDTH POINTS, CENTER WHEELS - 12.5L-15 WALKOVER, INNER WING WHEELS - 12.5.L-5 WALKOVER, OUTER WING WHEELS - 11L-15 WALKOVER, ONE OWNER, SMV SIGN, WARNING LIGHTS, HAS OPS MANUAL. STOCK #134753
Subcategory: Chisel Plow, Width (feet): Other, Points: 16 Inch Sweep, Standard: C Shank - Updated Thursday, February 2, 2012 		$54,500 US
Hours: - 		BILLINGS, MT, USA
2008 John Deere 2410 - Tillage
33'.3", 3 SECTION, FLOATING HITCH, TRUE DEPTH, 1250LB SHANKS, 25 SHANK, 16" SPACING, ACCUDEPTH CONTROLS, CASTERING GAUGE WHEELS, POINTS ARE GOOD, CONDITION IS A 8 OUT OF 10, 2ND OWNER LOCAL TRADE. CALL MIKE @1-507-236-0161. STOCK #128804
Subcategory: Chisel Plow, Points: Chisel Points, Standard: C Shank - Updated Wednesday, January 4, 2012 		$33,000 US
Hours: - 		JACKSON, MN, USA
2007 John Deere 2410 - Tillage
33'6", 3 SECTION, FLOATING HITCH, 25 TRUE DEPTH SHANKS, 16" SPACING, SINGLE POINT, NEW POINTS 30 ACRES AGO, LOCAL TRADE,ONE OWNER. CALL MIKE @1-507-236-0161. STOCK #131218
- Updated Friday, February 3, 2012 		$34,000 US
Hours: - 		JACKSON, MN, USA
2010 John Deere 2410 - Tillage
33', 3 SECTION 15' MAINFRAME, FLOATING HITCH, 25 SHANKS, TRU DEPTH, 1250# TRIP FORCE, 16" SPACINGS, ACCUDEPTH CONTROL, CASTERING GUAGE WHEELS, NO POINTS, TANDEM WALKING WHEELS, PAINT & FRAME QUALITY: 9, MECHANICAL CONDITION:9, COOP OWNED, USED FOR NH3 APPLICATIONS, QUESTIONS CALL RICK 712-298-0592, SAFETY EQUIPMENT (SMV, WARNING LIGHTS, SHIELDS, LIGHTS), OPERATORS MANUAL. STOCK #133818
Subcategory: Chisel Plow, Width (feet): Other, Points: None, Standard: Spring Reset - Updated Thursday, January 19, 2012 		$34,000 US
Hours: - 		TRUMAN, MN, USA
2011 John Deere 2410 - Tillage
33', 3 SECTION 15' MAINFRAME, FLOATING HITCH, 25 SHANKS, TRU DEPTH, 1250# TRIP FORCE, 16" SPACINGS, ACCUDEPTH CONTROL, CASTERING GUAGE WHEELS, NO POINTS, TANDEM WALKING WHEELS, PAINT & FRAME QUALITY: 9, MECHANICAL CONDITION:9, COOP OWNED, USED FOR NH3 APPLICATIONS, QUESTIONS CALL RICK 712-298-0592, SAFETY EQUIPMENT (SMV, WARNING LIGHTS, SHIELDS, LIGHTS), OPERATORS MANUAL. STOCK #133820
Subcategory: Chisel Plow, Width (feet): Other, Standard: Spring Reset - Updated Thursday, January 26, 2012 		$36,500 US
Hours: - 		TRUMAN, MN, USA
2011 John Deere 2700 - Tillage
17'6, FOLDING, 7 SHANK 30", SINGLE POINT, MULCH RIPPER, PARABOLIC CUSHION TRIP STANDARD, DISK LEVELERS, 10" LASERRIP, TANDEM WALKING WHEELS: MAINFRAME ONLY, C-SPRING DISK GANG STANDARDS, 8" COVERBOARDS, PAINT & FRAME QUALITY: 9, MECHANICAL CONDITION: 9, ONE OWNER, LOCAL TRADE, OPERATORS MANUAL. AVAILABLE: JAN 2012. STOCK #124402
- Updated Thursday, January 12, 2012 		$45,575 US
Hours: - 		PIPESTONE, MN, USA
2010 John Deere 2700 - Tillage
17 1/2', RIGID FRAME, 7 SHANK 30" SPACING, SINGLE POINT DEPTH, MULCH RIPPER, 17 1/4" DISK SPACING 22" DISK BLADES, PARABOLIC CUSHION TRIP 4100# STANDARDS, NEW SUMMERS HD 3 BAR HARROW, 10" LASER RIP POINTS, TANDEM WALKING SHEELS, T HITCH, C SPRING CUSHION DISKS, COVERBOARDS INCLUDED, NEW BLACKLAND KIT INSTALLED, VERY LOW ACRES - CALL GIL 507-236-4731. STOCK #127010
Subcategory: Ripper, Disk Blade (inches): 22, Points: 7 Inch Sweep, Standard: Safety Trip - Updated Monday, November 7, 2011 		$43,900 US
Hours: - 		ST. JAMES, MN, USA
2008 John Deere 2700 - Tillage
17 FOOT 6 INCH RIGID FRAME, DISK RIPPER, CLEVIS HITCH, 7 SHANKS, SPRING RESET SHANKS, SINGLE POINT DEPTH CONTROL, 7 INCH CAST LASER RIP POINTS. STOCK #100775
Subcategory: Disk Ripper, Width (feet): 18, Points: 7 Inch Sweep, Standard: Spring Reset - Updated Thursday, October 20, 2011 		$41,000 US
Hours: - 		LUVERNE, MN, USA
2008 John Deere 2700 - Tillage
14' RIPPER, FOLDING FRAME, 7 SHANK 30", SINGLE POINT DEPTH CONTROL, MULCH RIPPER, 17 -1/4 DISK BLADE SPACING, PARABOLIC CUSHION TRIP, REAR DISK CONDITIONER, 4-11L-15FI D LR TIRES, 7" LASERRIP RIPPER POINT WITH HARDWARE, WALK OVER TANDEM CENTER FRAME WHEELS, T STYLE HITCH WITH NODULAR HITCH LINK CATEGORY IV FOR 2 1/8" OR LESS DIAMETER PIN, C SPRING GANG MOUNT WITH CONDITIONER,8" COVERBOARDS, STANDARDS WITH WEAR SHINS,PAINT & FRAME 8, MECHANICAL CONDITION 8, ONE OWNER, LOCAL TRADE, ALWAYS SHEDDED,SAFETY CHAIN, WARNING LIGHTS W/TURN SIGNALS, OPERATORS MANUAL, STOCK #105934
- Updated Thursday, December 29, 2011 		$39,000 US
Hours: - 		YANKTON, SD, USA
2010 John Deere 2700 - Tillage
17', RIGID FRAME, 7 SHANK 30", SINGLE POINT DEPTH, MULCH RIPPER, 11"X24" DISK SPACING, 4100# TRIP, SPRING RESET, REAR DISK CONDITIONER, 7" LASER RIP POINTS, TANDEM WHEELS, ALL CONDITION 8, LOW ACRES - CALL GIL 507-236-4731. STOCK #133639
Subcategory: Disk Ripper, Disk Blade (inches): 24, Standard: Safety Trip - Updated Thursday, January 12, 2012 		$40,000 US
Hours: - 		ST. JAMES, MN, USA
2001 John Deere 2700 - Tillage
18 FEET, FOLDING, 9 SHANK 24", SINGLE POINT, DISK RIPPER, 4100# TRIP FORCE, SPRING RESET, REAR DISK LEVELER, 4-12.5LX15 FRAME GAUGE WHEELS, LASER RIP, T- HITCH, C-SPRING, LOCAL TRADE--SHEDDED, STOCK #127680
Subcategory: Disk Ripper, Width (feet): 18, Disk Blade (inches): 20, Points: None, Standard: Spring Reset - Updated Friday, November 18, 2011 		$22,000 US
Hours: - 		TRUMAN, MN, USA
2009 John Deere 2700 - Tillage
17.5FT, FOLDING FRAME, NARROW TRANS, 7 SHANK 30", SINGLE POINT, DISK RIPPER, 16.5X22 DISK GANG, 4100# TRIP FORCE, CUSHION TRIP STANDARDS, DISK LEVELER, 4 FRAME GUAGE WHEELS, 7" LASER POINTS, WALKNIG TANDEMS ON MAIN FRAME, T HITCH, C SPRING DISK GANG, 8" COVERBOARDS, NO WEAR SHINS, PAINT & FRAME QUALITY: 9, MECHANICAL CONDITION:9, LOCAL ONE OWNER, USED ON 4150 ACRES. STOCK #134802
Subcategory: Disk Ripper, Width (feet): Other, Disk Blade (inches): 22, Points: 7 Inch Sweep, Standard: C Shank - Updated Friday, February 3, 2012 		$39,000 US
Hours: - 		TRUMAN, MN, USA
2011 John Deere 2700 - Tillage
14', RIGID, 7 SHANK 24", SINGLE POINT, DISK RIPPER, 16.5" DISK SPACING & 22" BLADES, 4100 LB. STANDARDS, CUSHION TRIP STANDARDS, REAR DISK LEVELERS, TANDEM WALK OVER WHEELS, 7" LASERRIP POINTS, T HITCH, C SPRING DISK GANG STANDARDS, WEAR SHINS, PAINT & FRAME QUALITY:10, MECHANICAL CONDITION: 10, ONE OWNER, LOCAL TRADE, NEW CONDITION, HASN'T BEEN PUT IN THE GROUND, SMV, WARNING LIGHTS, OPERATORS MANUAL, FACTORY WARRANTY THROUGH 7/31/12. STOCK #132545
- Updated Tuesday, December 27, 2011 		$42,000 US
Hours: - 		TRUMAN, MN, USA
2009 John Deere 2700 - Tillage
18', RIDGID, NON FOLDING, 9 SHANK ON 24", SINGLE POINT DEPTH CONTROL, DISK RIPPER,4100# STANDARD TRIP FORCE, SPRING RESET, HYD REAR DISK LEVELER, WALKING TANDEM FRAME WHEELS, 7" LASER RIP POINTS,T HITCH, C SPRING DISK STANDARDS,PAINT & FRAME: 9, MECHANICAL CONDITION: 8, ONE OWNER, LOCAL TRADE, SHEDDED, SAFETY EQUIPMENT(SMV, WARNING LIGHTS, SHIELDS, LIGHTS), OPERATORS MANUAL. STOCK #130243
Subcategory: Disk Ripper, Width (feet): 18, Disk Blade (inches): 22, Points: 8 Inch Sweep, Standard: Spring Reset - Updated Monday, November 28, 2011 		$38,900 US
Hours: - 		TRUMAN, MN, USA
2010 John Deere 2700 - Tillage
CONVERTED TO BLACKLAND SPECIAL. 17'6" WIDTH, 7 STANDARD 30", 4100LB PARABOLIC CUSHION TRIP STANDARDS, 4100LB PARABOLIC CUSHION TRIP STANDARDS, C SPRING FRONT DISK MOUNT, 7" LASERRIP POINTS, SINGLE POINT DEPTH, REAR LEVELER. STOCK #79963
Subcategory: Ripper, Width (feet): Other - Updated Thursday, December 29, 2011 		$35,000 US
Hours: - 		ST. JAMES, MN, USA
2004 John Deere 2700 - Tillage
18FT, FOLDING FRAME, 7 SHANK 30", SINGLE POINT, MULCH RIPPER, PARABOLIC CUSHION TRIP, DISK LEVELER, 7" POINTS, WALKING TANDEMS, COVERBOARDS, PAINT & FRAME QUALITY: 7, MECHANICAL CONDITION: 6, ONE OWNER, LOCAL TRADE, AVAILABLE: JULY 2012. CALL TOM 507-920-7933. STOCK #133485
- Updated Monday, January 9, 2012 		$26,500 US
Hours: - 		LUVERNE, MN, USA
John Deere 2800 - Tillage
6 BOTTOM, ON LAND, METRIC, HYD WIDTH, SPRING CUSHION COULTERS, 2 PT HITCH, SMV SIGN, PAINT FADED - CALL GIL 507-236-4731. STOCK #134723
Subcategory: Moldboard Plow, Moldboard Plow Bottoms: 6, Standard: Spring Reset - Updated Monday, January 30, 2012 		$5,500 US
Hours: - 		ST. JAMES, MN, USA
John Deere 340 - Tillage
13’ 9” (9” SPACING) OLDER DISK, 22” CUTOUT ON REAR 21” SOLIDS ON FRONT. FOR MORE INFO CALL JAY HYMAS 208-351-0345. STOCK #133716
Subcategory: Disk, Width (feet): Other, Disk Blade (inches): 22 - Updated Tuesday, January 17, 2012 		$4,000 US
Hours: - 		REXBURG, ID, USA
2009 Summers 36 - Tillage
36FT, 3 SECTION, FLOATING HITCH, 27, SPRING RESET, 700#, 16 INCH, DOUBLE POINT, TRCYCLE WHEEL ARRANGEMENT, PAINT 7, MECHANICAL CONDITION 7, ONE OWNER LOCAL TRADE, SMV WARNING LIGHTS. STOCK #133455
Subcategory: Chisel Plow, Points: Chisel Points, Standard: C Shank - Updated Friday, January 6, 2012 		$29,500 US
Hours: - 		FREEMAN, SD, USA
Wil-Rich 36' - Tillage
36', 3 SECTION, RIGID HITCH, C SHANK, 3 BAR HARROW, PAINT AND TIN ARE 4 OF 10, MECHANICAL CONDITION IS 5 OF 10, LOCAL TRADE. STOCK #132259
Subcategory: Field Cultivator, Width (feet): Other, Points: 7 Inch Sweep, Standard: C Shank - Updated Monday, January 16, 2012 		$7,000 US
Hours: - 		PIPESTONE, MN, USA
John Deere 3600 - Tillage
6 BOTTOM PLOW ON LAND, SPRING RESET, WITH REAR HITCH, 12.5L 15 SL TIRES. STOCK #134048
Subcategory: Moldboard Plow, Moldboard Plow Bottoms: 6, Standard: Spring Reset - Updated Friday, January 20, 2012 		$6,400 US
Hours: - 		MILES CITY, MT, USA
John Deere 3600 - Tillage
6 BOTTOM PLOW ON LAND, SPRING RESET, 12.5L 15 SL TIRES. STOCK #134139
Subcategory: Moldboard Plow, Moldboard Plow Bottoms: 6, Standard: Spring Reset - Updated Friday, January 20, 2012 		$5,800 US
Hours: - 		MILES CITY, MT, USA
John Deere 3600 - Tillage
5 BOTTOM PLOW ON LAND, SPRING RESET, WITH REAR HITCH, 12.5L 15 SL TIRES, 2 COULTERS. STOCK #133999.
Subcategory: Chisel Plow, Moldboard Plow Bottoms: 5, Standard: Spring Reset - Updated Friday, January 20, 2012 		$5,368 US
Hours: - 		MILES CITY, MT, USA
John Deere 3600 - Tillage
4 BOTTOM PLOW ON LAND, SPRING RESET, 12.5L 15 SL. STOCK #134729
Subcategory: Moldboard Plow, Moldboard Plow Bottoms: 4, Standard: Spring Reset - Updated Wednesday, February 8, 2012 		$5,300 US
Hours: - 		MILES CITY, MT, USA
Unverferth 4" BAR - Tillage
UNVERFERTH , 1-BAR DIAGONAL 4' LH ASY. STOCK #74203
- Updated Thursday, December 29, 2011 		$170 US
Hours: - 		REXBURG, ID, USA
Case 400 - Tillage
5 BOTTOM PLOW ON LAND,9.5L 14SL TIRES, P25077R15, 3PT HITCH, SHEAR BOLT, LOCAL TRADE. STOCK #134040
Subcategory: Moldboard Plow, Moldboard Plow Bottoms: 5, Standard: Shear Bolt - Updated Friday, January 20, 2012 		$3,700 US
Hours: - 		MILES CITY, MT, USA
Phoenix 46' ROLLER HARROW - Tillage
BOLT ON PHOENIX 8" SPIKE ROLLER HARROW. STOCK #132802
Subcategory: Other, Width (feet): Other - Updated Wednesday, January 4, 2012 		$6,000 US
Hours: - 		MILES CITY, MT, USA
International Harvester 490 - Tillage
25', RIGID DISK, 21" DISK BLADE DIAMETER, 9" FRONT/9" REAR DISK BLADE SPACING, NO REAR ATTACHMENT, NO REAR HITCH, CRANK FOR/AFT ADJUSTMENT, HYDRUALIC WING CONTROL, MANUAL DEPTH ADJUSTMENT, WALKING TANDEMS ON MAINFRAME, SINGLE WHEELS ON WINGS, DISK SCRAPERS, RIGID DISK STANDARDS, SPHERICAL BLADES. STOCK #132599
- Updated Tuesday, December 27, 2011 		$6,500 US
Hours: - 		LUVERNE, MN, USA
Case IH 4900 - Tillage
38', 3 SECTION, RIGID, FLOATING HITCH, SPRING RESET STANDARDS, 9" STANDARD SPACING, MECHANICAL DEPTH CONTROL, 3 BAR HARROW, NO GUAGE WHEELS, 10" BOLT ON SWEEPS, WALKING TANDEMS ON BOTH, 15' MAINFRAME. STOCK #134733
Subcategory: Field Cultivator, Width (feet): Other, Disk Blade (inches): None, Points: 7 Inch Sweep, Standard: Spring Reset - Updated Wednesday, February 1, 2012 		$9,500 US
Hours: - 		LUVERNE, MN, USA
Tebben 5 SHANK - Tillage
12.5', 5 SHANK 30", SINGLE POINT DEPTH CONTROL, TEBBEN RIPPER, SPRING DOWN PRESSURE, DISK LEVELER, PAINT AND FRAME ARE A 7, LOCAL TRADE, VERY NICE! CALL CHADD 507.236.0227. STOCK #134503
- Updated Friday, January 27, 2012 		$2,500 US
Hours: - 		ST. JAMES, MN, USA
Other 5' COIL-TINE HARROW - Tillage
6 FIVE FT SECTIONS AVAILABLE; $35 EACH. COIL-TINE, MOUNTED HARROW. STOCK #72013
Width (feet): Other - Updated Thursday, January 5, 2012 		$270 US
Hours: - 		POWELL, WY, USA
Melroe 505 - Tillage
22' DRAWN CHISEL PLOW ON 12" CENTERS, REAR HITCH. STOCK #129447
Subcategory: Chisel Plow, Width (feet): 22 - Updated Friday, November 18, 2011 		$4,600 US
Hours: - 		REXBURG, ID, USA
1998 John Deere 510 - Tillage
17'6", RIGID, 7 SHANK 30", SINGLE POINT DEPTH, DISK RIPPER, 11" SPACING 22" BLADES, SPRING RESET, STRAIGHT POINTS, C SPRING GANGS, COMBINATION SCRAPERS, PAINT & FRAME QUALITY 6, MECHANICAL CONDITION:6, ONE OWNER, LOCAL TRADE, SAFETY EQUIPMENT (SMV, WARNING LIGHTS, SHIELDS, LIGHTS). STOCK #133703
Subcategory: Disk Ripper, Width (feet): Other, Disk Blade (inches): 22, Standard: Spring Reset - Updated Tuesday, January 17, 2012 		$19,500 US
Hours: - 		FREEMAN, SD, USA
2000 John Deere 512 - Tillage
17'6", RIGID, 7 SHANK 30" (260 -385 HP ARE NEEDED TO PULL), SINGLE POINT CRANK ADJUST, DISK RIPPER, 24"X.265 SOLID DISK BLADES (ALL FRONT DISK BLADES, GANG BOLTS AND SCRAPERS WERE REPLACED 4 YEARS AGO), 3 POSITION 4100 LB STANDARDS, SPRING RESET, 2 WALKING TANDEM FRAME WHEELS, 7" LASER RIP POINTS WITH VERY FEW ACRES, T HITCH, C SPRING DISK STANDARDS, PAINT IS A 8 OUT OF 10, FRAME AND MECHANICAL CONDITION IS A 8 OUT OF 10. ONE OWNER, LOCAL TRADE AND ALWAYS SHEDDED. ADJUSTMENT WRENCH IS THERE, ALL SAFETY EQUIPMENT IS ON AND COMPLETE. THIS RIPPER DID 40 OR SO ACRES LAST FALL. VERY NICE TILLAGE TOOL.CALL MIKE@1-507-236-0161. STOCK #133750
- Updated Wednesday, February 1, 2012 		$26,000 US
Hours: - 		JACKSON, MN, USA
2001 John Deere 512 - Tillage
17.5', RIGID FRAME, 7 SHANK 30", SINGLE POINT LEVELING CONTROL, DISK RIPPER, 22" REMAINING FRONT DISKS, 23" REMAINING REAR DISKS,PARABOLIC CUSHION TRIP, NO REAR ATTACHMENT, 4EA. 11.5X15 TIRES, 7" LASER POINT, A FRAME HITCH, C SPRING DISK GANG STANDARD, DISK BLADE SCRAPERS-V. GOOD CONDITION,6 PAINT,7 MECHANICAL, ONE OWNER, ALWAYS SHEDDED, WELL MAINTAINED. STOCK #133679
- Updated Tuesday, January 24, 2012 		$17,500 US
Hours: - 		ST. JAMES, MN, USA
2001 John Deere 512 - Tillage
17'6", RIGID FRAME, 7 SHANK 30", SINGLE POINT DEPTH CONTROL, DISK RIPPER, 11"X24" DISK SPACING AND DIAMETER, SPRING RESET STANDARDS, REAR HARROW, NO FRAME GUAGE WHEELS, 7' LASER RIP POINTS, WALKING TANDEMS, CLEVIS HITCH, C SPRING DISK GANG STANDARD, DISK BLADE SCRAPERS, STANDARD WEAR SHINS. STOCK #131640
Subcategory: Disk Ripper, Width (feet): 18, Disk Blade (inches): 22, Points: 7 Inch Sweep, Standard: Spring Reset - Updated Tuesday, December 13, 2011 		$27,000 US
Hours: - 		LUVERNE, MN, USA
2010 John Deere 512 - Tillage
22'6", FOLDING, 9 SHANK 30", TOUCHSET DEPTH CONTROL, MULCH RIPPER, 24"X.256" SOLID, PARABOLIC CUSHION TRIP, 7" LASERRIP POINTS, DISK BLADE SCRAPERS, COVERBOARDS, WEAR GAURDS, PAINT & FRAME: 9, MECHANICALLY: 7, ONE OWNER, LOCAL TRADE, CALL FOR MORE DETAILS! CHADD 507.236.0227 - AVAILABLE: AFTER FALL 2011 - STOCK #105191
Subcategory: Ripper, Width (feet): 22, Disk Blade (inches): 24, Points: Chisel Points, Standard: Safety Trip - Updated Saturday, October 15, 2011 		$53,000 US
Hours: - 		ST. JAMES, MN, USA
2008 John Deere 512 - Tillage
22'6", FOLDING, 9 SHANK 30", MULCH RIPPER, 24"X.256" SOLID, PARABOLIC CUSHION TRIP, 7" LASERRIP POINTS, DISK BLADE SCRAPERS, COVERBOARDS, WEAR GAURDS, PAINT & FRAME: 9, MECHANICALLY: 7, ONE OWNER, LOCAL TRADE, CALL FOR MORE DETAILS! CHADD 507.236.0227. STOCK #131707
- Updated Wednesday, January 4, 2012 		$47,000 US
Hours: - 		ST. JAMES, MN, USA
2009 John Deere 512 - Tillage
17 FT. 6 IN., FOLDING REAR GANG, 7 SHANK, SINGLE POINT DEPTH CONTROL, DISK RIPPER, 24 INCH BLADES, SPRING RESET STANDARDS, 7 INCH LASERRIP POINTS, TANDEM WALKING WHEELS. STOCK #125541
Subcategory: Disk Ripper, Width (feet): 18, Disk Blade (inches): 24, Points: 8 Inch Sweep, Standard: Spring Reset - Updated Tuesday, October 4, 2011 		$30,000 US
Hours: - 		LUVERNE, MN, USA
2000 John Deere 512 - Tillage
17'6" WORKING WIDTH, RIGID FRAME, 7 SHANK 24", SINGLE POINT DEPTH CONTROL, DISK RIPPER', 11"X24" DISK SPACING AND DIAMETER, 4100LB STANDARD TRIP FORCE, SPRING RESET STANDARDS, DISK LEVELER, 7" LASER RIP PTS, MAINFRAME TANDEM WHEELS. STOCK #124239
Subcategory: Disk Ripper, Width (feet): Other, Disk Blade (inches): 22, Points: None, Standard: Spring Reset - Updated Sunday, October 16, 2011 		$24,000 US
Hours: - 		LUVERNE, MN, USA
2008 John Deere 512 - Tillage
22' 6" DISK RIPPER, FOLDING FRAME, 9 SHANK 30" SPACING, SINGLE PT DEPTH CONTROL, DISKS MEASURE 23.5" ON AVG, PARABOLIC CUSHION TRIP STANDARDS, NO REAR ATTACHMENT, 7" LASERRIP PTS, TANDEM WALKING WHEELS ON MAINFRAME & WINGS, C SPRING DISK GANG, WEAR SHINS, PAINT/FRAME: 8, MECH COND: 8, ONE OWNER, LOCAL TRADE, ALWAYS SHEDDED, STOCK #123976
Subcategory: Disk Ripper, Disk Blade (inches): 24 - Updated Saturday, August 13, 2011 		$49,500 US
Hours: - 		PIPESTONE, MN, USA
2011 John Deere 512 - Tillage
22'6", FOLDING, 9 SHANK 30", TOUCHSET DEPTH CONTROL, DISK RIPPER, 24"X.256" SOLID, PAABOLIC CUSH-TRIP, 7"CAST LASER RIP PTS, NODULAR HITCH LINK CAT 5, DISK BLADE SCRAPERS, STANDARD WEAR SHINS, PAINT AND FRAME QUALITY IS 9, MECHANICAL CONDITION IS 8, ONE OWNER,LOCAL TRADE,ALWAYS SHEDDED, SMV, OPERATORS MANUAL, FACTORY WARRANTY EXPIRATION DATE IS OCT.26TH 2012. STOCK #133483
Subcategory: Ripper, Width (feet): 22, Disk Blade (inches): 24, Points: Chisel Points, Standard: Safety Trip - Updated Wednesday, January 11, 2012 		$58,000 US
Hours: - 		TRUMAN, MN, USA
2008 John Deere 512 - Tillage
22'6", FOLDING, 9 SHANK 30", MULCH RIPPER, 24"X.256" SOLID, PARABOLIC CUSHION TRIP, 7" LASERRIP POINTS, DISK BLADE SCRAPERS, COVERBOARDS, WEAR GAURDS, PAINT & FRAME: 9, MECHANICALLY: 7, ONE OWNER, LOCAL TRADE, CALL FOR MORE DETAILS! CHADD 507.236.0227. STOCK #133042
Subcategory: Ripper, Width (feet): 22, Disk Blade (inches): 22 - Updated Monday, January 9, 2012 		$47,000 US
Hours: - 		ST. JAMES, MN, USA
2010 Landoll 6230 - Tillage
23', TANDEM DISK, 1/4" BY 24"BLADES THAT MEASURE JUST UNDER 24", 9" FRONT AND 9" REAR SPACING, GATES 3 BAR HARROW, HYD FORE/AFT, HYD WING CONTROL, SINGLE POINT DEPTH, WALKING TANDEMS ON MAINFRAME, WALKING TANDEMS ON WINGS, SCRAPERS, SPHERICAL BLADES, # OF ACRES:: 1600 ACRES, WARNING LIGHTS, SMV SIGN, LOCAL TRADE, ALWAYS SHEDDED
- Updated Thursday, February 9, 2012 		$37,000 US
Hours: - 		YANKTON, SD, USA
John Deere 630 - Tillage
28', FLEX DISK, 9" SPACING, HYADRAULIC FORE/AFT, HYDRAULIC WING CONTROL, SINGLE POINT DEPTH CONTROL, WING WHEELS, DISK SCRAPERS, PAINT & FRAME QUALITY: 5, MECHANICALLY: 6, LOCAL TRADE, CALL CHADD TODAY @ 507.236.0227. STOCK #133643
- Updated Tuesday, January 17, 2012 		$16,000 US
Hours: - 		ST. JAMES, MN, USA
2004 John Deere 637 - Tillage
32 FOOT DISK, 9IN SPACEING FRONT AND BACK, WITH HARROWS, NO REAR HITCH, HAS HYDRAULIC WING CONTROL, WALKING TANDEMS ON MAIN FRAME, WALKING TANDEMS ON WINGS, STANDERD SCRAPERS, C SPRING STANDARDS, SPHERICAL DISKS, ONE OWNER, LOCAL TRADE. DISK WILL HAVE THE FRONT GANG REPLACED AND WILL ONLY HAVE ABOUT 500 ACRES ON THE DISKS SU#134846
- Updated Friday, February 10, 2012 		$40,000 US
Hours: - 		ROSCOE, SD, USA
2001 John Deere 637 - Tillage
32'1" WORKING WIDTH, ROCK FLEX DISK, 21.5" FRONTS & 20" REAR BLADE DIAMETER, 9/9" DISK SPACING, REAR HARROW, NO REAR HITCH, HYDRAULIC FORE/AFT LEVELING, NO HYDRUALIC WING CONTROL, SINGLE POINT DEPTH CONTROL, WALKING TANDEMS ON MAINFRAME, WALKING TANDEMS ON WINGS, DISK SCRAPERS, C SPRING STANDARDS, SPHERICAL BLADES. STOCK #106190
- Updated Wednesday, July 27, 2011 		$31,000 US
Hours: - 		LUVERNE, MN, USA
1997 John Deere 640 - Tillage
NICE, NO WELDS 15', CONE BLADES, 19.5" FRONT/21" REAR DISC BLADES, CENTER BUSTER, DUAL WHEELS, LIFT CYL, 9" SPACING. STOCK #134795
Subcategory: Disk, Width (feet): Other - Updated Friday, February 3, 2012 		$9,950 US
Hours: - 		BILLINGS, MT, USA
1997 John Deere 650 - Tillage
32' TANDEM DISK, NEW 26" FRONT, 23" REAR DISK BLADES W 9" FRONT/11" REAR SPACING, HYD FORE/AFT ADJUSTMENT, HYD WING CONTROL, SINGLE POINT DEPTH, DUAL WHEELS ON MAIN FRAME 11L-15 SINGLE WHEELS ON WINGS 11L-15, SELF ADJUSTING SCRAPERS, RIGID GANG STANDARDS, SPHERICAL BLADES, WARNING LIGHTS, OPERATORS MANUAL INCLUDED. AVAIL: AUG 2012. STOCK #134793
Subcategory: Disk, Width (feet): 32, Disk Blade (inches): 26 - Updated Tuesday, February 7, 2012 		$19,900 US
Hours: - 		BILLINGS, MT, USA
John Deere 680 - Tillage
27FT, 3 SECTION, LL, 20 TRU DEPTH, 1250LBS, 16IN SPACING, SINGLE POINT, NO HARROW, CASTERING GAUGE WHEELS, DOUBLE POINT, POINTS CAN BE TURNED FOR NEXT SEASON, TANDEM WALKING WHEELS, PAINT 7, MECHANICAL 8, LOCAL TRADE. CALL JEFF 507-840-0238. STOCK #133106
Subcategory: Chisel Plow, Width (feet): Other - Updated Thursday, January 5, 2012 		$16,500 US
Hours: - 		JACKSON, MN, USA
1997 John Deere 685 - Tillage
50FT, 3 SECTION, FLOATING HITCH,SPRING RESET STANDARDS, SINGLE POINT, 3 BAR HARROW, BOLT ON, TANDEMS, LOCAL TRADE, ONE OWNER. AVAILABLE: DEC. 1, 2011 SU# 128075
Subcategory: Chisel Plow, Points: 16 Inch Sweep, Standard: C Shank - Updated Tuesday, November 8, 2011 		$27,000 US
Hours: - 		ROSCOE, SD, USA
2004 Brandt 7000 - Tillage
70' HEAVY HARROW, 24" TO 25" TOOTH LENGTH, HARROW HAS BEEN USED VERY LITTLE. STOCK #129912
Subcategory: Other, Width (feet): Other - Updated Wednesday, December 7, 2011 		$28,000 US
Hours: - 		BILLINGS, MT, USA
John Deere 712 - Tillage
16'3", RIGID, 13 SHANK 15" SPACING, MULCH TILLER, 20" COULTERS, 9" SPACING, TRU DEPTH STANDARDS, CONCAVE TWISTED SHOVELS, SINGLE WHEELS (11LX15), PAINT & FRAME 7, MECHANICAL 8, CALL GIL 507-2236-4731. STOCK #134465
- Updated Wednesday, January 25, 2012 		$4,995 US
Hours: - 		ST. JAMES, MN, USA
1991 John Deere 724 - Tillage
30', 3 SECTION, LEVEL LIFT HITCH, SPRING RESET STANDARDS, 135# SHANKS, 9" SPACING, SINGLE POINT DEPTH CONTROL, 3 BAR HARROW, BOLT-ON SWEEPS, WALKING TANDEMS ON MAINFRAME AND WINGS, PAINT/FRAME QUALITY: 6, MECHANICAL COND: 7, LOCAL TRADE, STOCK NUMBER 134836
Subcategory: Mulch Finisher, Width (feet): 30, Points: 10 Inch Sweep, Standard: C Shank - Updated Tuesday, February 7, 2012 		$17,000 US
Hours: - 		PIPESTONE, MN, USA
1997 John Deere 726 - Tillage
33.9 FEET, 3 SECTION, LEVEL LIFT HITCH, SPRING RESET STANDARD, 135 TRIP FORCE, 9 INCH SPACING, SINGLE POINT DEPTH CONTROL, 5 BAR COIL TINE HARROW, 12 INCH BOLT ON SWEEPS THAT MEASURE 11.5 INCHES, WALKING TANDEM WHEELS ON MAINFRAME AND WINGS, HYD. ADJUST GANG WITH 20" BLADES THAT MEASURE 18.5", DURA FLEX BEARINGS, PAINT & FRAME QUALITY:4, MECHANICAL CONDITION:6, ONE OWNER LOCAL TRADE, 45 STANDARDS, SMV, WARNING LIGHTS, OPERATORS MANUAL. STOCK #124117
- Updated Tuesday, August 23, 2011 		$29,500 US
Hours: - 		WAGNER, SD, USA
2008 Case IH 730C - Tillage
17' 6", RIGID FRAME, 7 SHANK 30", INDEPENDENT HYDRAULIC DEPTH CONTROL, DISK RIPPER, 15" X 24" SPACING AND DIAMETER, SPRING RESET STANDARDS, DISK LEVELER, NO GUAGE WHEELS, 10" TIGER POINTS, SINGLE WHEELS ON MAINFRAME, CLEVIS HITCH, C SPRING DISK GANG, NO DISK BLADE SCRAPERS, COVERBOARDS. STOCK #125538
- Updated Wednesday, October 26, 2011 		$35,000 US
Hours: - 		LUVERNE, MN, USA
2009 Landoll 7430 - Tillage
23 FOOT WORKING WIDTH, VERTICAL TILL TILLAGE, 22 BLADES MEASURE 21.25 PLUS, 7INCH SPACING, ROLLING BASKET, HYD FORE/AFT LEVELING, SINGLE POINT DEPTH, WALKING TANDEMS ON MAINFRAME, RIGID SCRAPERS, C SPRING GANG STANDARDS, SPHERICAL BLADES, # OF ACRES:3500
- Updated Thursday, February 9, 2012 		$39,500 US
Hours: - 		YANKTON, SD, USA
Miller 7600 - Tillage
28',HUTCH MASTER TANDEM DISK, 21" NOTCHED FRONT,22 1/2" SOLID REAR DISK BLADES, 9" SPACING FRONT & REAR, REAR HITCH, MANUAL FORE/AFT ADJUSTMENT, TANDOM WHEELS ON MAIN FRAME, TANDOM WHEELS ON WINGS, DISK SCRAPERS, RIGID STANDARD, FRONT NOTCHED SPHERICAL, REAR SOLID SPHERICAL, PAINT & FRAME QUALITY: 7, MECHANICAL CONDITION: 7, LOCAL TRADE, CALL FOR INFO JOHN AT 208-351-3836. STOCK #134496
- Updated Friday, January 27, 2012 		$12,500 US
Hours: - 		REXBURG, ID, USA
2008 Landoll 876-40-C TILLALL - Tillage
40 FT, 3 SECTION FRAME, LOW TRANSPORT, LEVEL LIFT, SPRING RESET STANDARDS, 10" SPACING, HYD DEPTH CONTROL, ROLLING BASKETS FOLLOWED BY 3 BAR SPIKE TOOTH HARROW, 10" SWEEPS, DISKS ARE APPROX 19 1/4", TANDEM WALKING WHEELS ON MAIN FRAME & WINGS, PAINT/FRAME QLTY: 8, MECHANICAL COND: 8, ONE OWNER, LOCAL TRADE, 48 TOTAL STANDARDS, STOCK #123914
Subcategory: Mulch Finisher, Width (feet): 40, Disk Blade (inches): 20, Points: 10 Inch Sweep, Standard: Spring Reset - Updated Monday, August 15, 2011 		$41,950 US
Hours: - 		PIPESTONE, MN, USA
2010 John Deere 915 - Tillage
22'6", 9 SHANK 30" V-RIPPER, CUSHION TRIP STANDARDS, DUAL GAUGE WHEELS, PARKING STAND, QUESTIONS CALL RICK 712-298-0592. STOCK #131509
- Updated Monday, December 12, 2011 		$18,000 US
Hours: - 		TRUMAN, MN, USA
1991 John Deere 960 - Tillage
24 FOOT WORKING WIDTH, 3 SECTION FRAME, 3PT HITCH, STANDARD S-TINES, NO TRIP TINES, 4.5" TINE SPACING, GAUGE WHEEL DEPTH CONTROL, REAR COIL TINE HARROW ATTACHMENT, 20.5X8.10 GAUGE WHEELS, 4" SWEEP. STOCK #129380
Subcategory: Field Cultivator, Width (feet): Other, Points: 4 Inch Sweep, Standard: Tine - Updated Friday, November 11, 2011 		$6,450 US
Hours: - 		POWELL, WY, USA
1996 John Deere 980 - Tillage
SPRING RESET, 135# SHANK, 6.5" SPACING, SGL PT DEPTH CONTROL, 3 BAR HARROW, TEETH IN GOOD CONDITION, BARS NOT BENT, 7" SWEEPS, WALKING AX MAINFRAME, PAINT 6, 77 SHANKS. STOCK #123647
Subcategory: Field Cultivator, Points: 7 Inch Sweep - Updated Friday, January 27, 2012 		$16,500 US
Hours: - 		FREEMAN, SD, USA
1995 John Deere 980 - Tillage
44.5', 5 SECTION FRAME, LOW TRANSPORT, LEVEL LIFT, 6" STANDARD SPACING, SINGLE POINT DEPTH CONTROL , 3 BAR HARROW, 2 FRONT GAUGE WHEELS, BOLT ON SWEEPS, TANDEM WALKING WHEELS ON MAIN FRAME AND WING, PAINT & FRAME QUALITY:5, MECHANICAL CONDITION:6, LOCAL TRADE. STRAIGHT HARROW, 15' MAIN FRAME, 89 STANDARDS, OPERATORS MANUAL, CALL BRIAN 507-236-0685. STOCK #134725
- Updated Monday, January 30, 2012 		$17,500 US
Hours: - 		ST. JAMES, MN, USA
1997 John Deere 980 - Tillage
36'6", RIGID, 3 SECTION, LEVEL LIFT, C SHANK STANDARD, 6" SPACING, SINGLE POINT DEPTH CONTROL, 3 BAR HARROW, BOLT ON 9" TRUE WIDTH SWEEPS, TANDEM WALKING WHEELS - MAINFRAME, WINGS, PAINT & FRAME QUALITY:5, MECHANICAL CONDITION:6, MAINFRAME 15', AVAILABLE END OF 3-30-2012. STOCK #130278
Subcategory: Field Cultivator, Width (feet): Other, Standard: C Shank - Updated Thursday, January 19, 2012 		$15,000 US
Hours: - 		WAGNER, SD, USA
John Deere 980 - Tillage
20 FT, 3 SECTION, LEVEL LIFT, C-SHANK, SINGLE POINT DEPTH CONTROL, 3 BAR HARROW, BOLT ON SWEEP, WALKING TANDEM, HAS SMV SIGN, REFLECTIVE DECALS, NO WARNING LIGHTS, NO FIRE EXT., NO OPERATORS MANUAL, NO FACTORY WARRANTY - EXPIRED, 12FT MAIN FRAME. STOCK #131200
- Updated Wednesday, December 7, 2011 		$13,500 US
Hours: - 		POWELL, WY, USA
John Deere 985 - Tillage
50'6" WIDTH, 5 SECTION, LOW TRANSPORT, LEVEL LIFT HITCH, TRU POSITION STD, 135LB TRIP, 6"" SPACING, SINGLE POINT DEPTH, 3 BAR HARROW, 1 SEASON USE ON NEW TINES, (4) RATCHET FRAME MOUNTED GAUGE WHEELS, 7" PERMALOC SWEEPS, TANDEM WALKING WHEELS MAINFRAME & WINGS, PAINT & FRAME QUALITY - 7, MECHANICAL CONDITION - 7, 15' MAINFRAME, 101 SHANKS, SMV, WARNING LIGHTS. STOCK #134800
Subcategory: Field Cultivator, Width (feet): Other, Points: 7 Inch Sweep, Standard: C Shank - Updated Friday, February 3, 2012 		$26,750 US
Hours: - 		PIPESTONE, MN, USA
AerWay AW3000 - Tillage
30', 3 SECTION, HYD ADJUST ON HITCH TO LEVEL, C-FLEX, REAR HITCH, ONE OWNER, LOCAL TRADE, BLADES ARE AT 6" TIRES AT 50% 15.5L-15SL, SINGLE ROW, NO OPERATORS MANUAL. STOCK #134027
Subcategory: Other, Width (feet): 30 - Updated Friday, January 20, 2012 		$17,500 US
Hours: - 		MILES CITY, MT, USA
Other EVERSMAN 12' TANDEM DISK - Tillage
12', TANDEM DISK, 19" DISK SCRAPERS, RIGID, CUTOUT ON FRONTS STANDARD ON REAR. STOCK #134311
Subcategory: Disk, Width (feet): 12 - Updated Monday, January 23, 2012 		$1,300 US
Hours: - 		MILES CITY, MT, USA
2010 Other GENERAL IMPLEMENT PM HERCULES 4' - Tillage
GENERAL IMPLEMENT - 4'X7' 6" 1/2' HARROW. STOCK #82360
Width (feet): Other - Updated Wednesday, January 25, 2012 		$118 US
Hours: - 		POWELL, WY, USA
2009 Other General Implement SC PTH-20-26 - Tillage
2009 GENERAL IMPLEMENT,9' 11" HD TANDEM DISC! Stock #63382.
Subcategory: Disk, Width (feet): Other - Updated Thursday, December 29, 2011 		$7,500 US
Hours: - 		SHERIDAN, WY, USA
John Deere PQ25-4 HARROW - Tillage
GENERAL IMPL PEPIN DB 4-F-6/6. STOCK #32201
- Updated Thursday, December 29, 2011 		$300 US
Hours: - 		REXBURG, ID, USA
2008 Wil-Rich QX2 - Tillage
50' 9", 5 SECTION, 13' MAIN FRAME, FLOATING HITCH, C SHANK, 150LB TRIP FORCE, 7" SPACING, MANUAL DEPTH CONTROL, 4 BAR HARROW, 2 CASTERING GAUGE WHEELS ON THE MAIN FRAME AND 1 ON EACH WING SECTION, 7" SWEEPS, 2 SETS OF WALKIG TANDEM WHEELS ON THE MAINFRAME AND 1 SET ON THE WINGS, APPEARANCE IS A 9 OUT OF 10, MECHANICAL CONDITION IS A 8 OF 10, SOME NEW SWEEP WEAR BUT THE MACHINE IS NICE OVERALL, 13' MAINFRAME, 87 STANDARDS. STOCK #91865
Subcategory: Field Cultivator, Width (feet): 45, Points: 6 Inch Sweep, Standard: C Shank - Updated Thursday, August 4, 2011 		$53,000 US
Hours: - 		PIPESTONE, MN, USA
Summers SUPER COULTER PLUS - Tillage
40' WIDTH, 10" BLADE SPACING, ROLLING CHOPPER RESIDUE MANAGERS, NO REAR HITCH, HYD FORE/AFT HITCH ADJUSTMENT, HYD WING CONTROL, 4 WHEEL MAINFRAME LIFT, 2 WHEELS EACH WING, SUPER-FLEX C SHANKS, TURBO DISKS ON FRONT GANG, 13 WAVE DISK ON BACK GANG, PAINT/FRAME QUALITY: 8, MECHANICAL COND: 8, ONE OWNER, LOCAL TRADE, ALWAYS SHEDDED, SMV, WARNING LIGHTS, 900LB WEIGHT KIT, CALL GREG @ 507-820-1880. STOCK #133674
Subcategory: Other, Width (feet): 40 - Updated Friday, January 13, 2012 		$49,000 US
Hours: - 		PIPESTONE, MN, USA
2008 Summers SUPERCHISEL - Tillage
40FT, 3 SECTION, FLOATING HITCH, 40, SPRING RESET STANDARDS, 1000LB, 12IN, SINGLE POINT , 3 BAR HARROW, BOLT ON, TANDEMS, LOCAL TRADE, ONE OWNER. AVAILABLE DECEMBER 1, 2011 SU#128076
Subcategory: Chisel Plow, Width (feet): 40, Disk Blade (inches): 24, Points: Chisel Points, Standard: Spring Reset - Updated Wednesday, November 16, 2011 		$43,000 US
Hours: - 		ROSCOE, SD, USA
DMI TIGERMATE - Tillage
31', 3 SECTION, RIGID, FLOATING HITCH, SPRING RESET STANARDS, 9" SPACING, MECHANICAL DEPTH CONTROL, 3 BAR HARROW, 7" BOLT ON SWEEPS, WALKING TANDEMS ON BOTH. STOCK #130980
Subcategory: Field Cultivator, Width (feet): 30, Points: 7 Inch Sweep, Standard: Spring Reset - Updated Friday, December 2, 2011 		$14,500 US
Hours: - 		LUVERNE, MN, USA
2000 DMI TigerMate - Tillage
48'6", 5 SECTION, LEVEL LIFT HITCH, TRUE POSITION STANDARDS, 200# TRIP FORCE, 7" SPACING, SINGLE POINT DEPTH CONTROL, 3 BAR HARROW, 6 NON-CASTERING FRAME-MOUNTED GUAGE WHEELS, NEW 7.5" TRUE WIDTH SWEEPS, KNOCK-ONS, WALKING TANDEMS ON MAINFRAME AND WINGS, PAINT AND TIN IS 8 OF 10, MECHANICAL CONDITION IS 8 OF 10, ONE OWNER LOCAL TRADE, 12' MAIN FRAME, 83 STANDARDS, ALL SAFETY EQUIPMENT IN PLACE, VERY NICE TIGHT MACHINE, HAS ALWAYS BEEN SHEDDED. HAS A DMI REAR HITCH TO PULL A DMI 48.5 FT CRUMBLER, S/N is JFH0022559. HARROW TEETH ARE ALL THERE. THEY MEASURE 14" AVERAGE. THE CRUMBLER IS ALSO THE SAME AGE. EXCELLENT CONDITION WITH NEW BEARINGS IN EACH END OF ALL ROLLING BASKETS. RODS ARE STRAIGHT, PAINT IS GOOD. STOCK #134495
- Updated Friday, January 27, 2012 		$42,000 US
Hours: - 		PIPESTONE, MN, USA