John Deere

Welcome to
MARTIN BROTHERS

 MachineFinder
Back   Visit JohnDeere.com   Contact Us

Store Information
Show all dealer location details

Category : Combine Cutting Platforms (Change Category)

Category
 Manufacturer
 Model
 Text Search
2008 Case IH 1020 - Combine Cutting Platforms
2008 CASE IH 1020 25' PLATFORM, SN CBJ043532, LATERAL TILT, F/A, NOT FULL FINGER, 25', REEL & AUGER STRAIGHT, POLY SKIDS, GOOD CONDITION
- Updated Tuesday, January 24, 2012 		$17,500 US
Hours: - 		CARTHAGE, IL, USA
2000 Case IH 1020 - Combine Cutting Platforms
2000 CASE IH 1020 30' FLEX PLATFORM, SN JJC0322716, HYD F/A, DOUBLE CUT SICKLE
- Updated Friday, November 11, 2011 		$10,000 US
Hours: - 		LEXINGTON, IL, USA
2006 John Deere 622 - Combine Cutting Platforms
2006 JD 622 PLATFORM, SN 715522, HYDRA FLEX, CM, COMPOSITE FINGERS, LOW STONE DAM
- Updated Tuesday, January 10, 2012 		$22,000 US
Hours: - 		QUINCY, IL, USA
2009 John Deere 625 - Combine Cutting Platforms
2009 JD 625F PLATFORM, SN 730521, COMPOSITE FINGERS, STUBBLE LIGHTS, CM, VERY NICE, LOW ACRES, NOT AVAIL TIL JAN
- Updated Tuesday, January 24, 2012 		$27,000 US
Hours: - 		CARTHAGE, IL, USA
2008 John Deere 625F - Combine Cutting Platforms
2008 JD 625F COMPOSITE FINGERS, SN 725705, CM, STUBBLE LIGHTS, VERY CLEAN, LOW ACRES, CAME OFF A 9570, HAS STRIPPER EXT, AVAIL JULY
- Updated Tuesday, January 10, 2012 		$26,000 US
Hours: - 		CARTHAGE, IL, USA
2010 John Deere 625F - Combine Cutting Platforms
2010 JD 625F PLATFORM, SN 735879, CM, STUBBLE LIGHTS, CAME OFF 70 SERIES, VERY NICE, LOW ACRES, AVAIL JULY
- Updated Thursday, February 2, 2012 		$28,000 US
Hours: - 		CARTHAGE, IL, USA
2005 John Deere 625F - Combine Cutting Platforms
2005 JD 625F PLATFORM, SN 710610, SHAFT DRIVE, SINGLE PT CONNECT, AUGER FLIGHTING GOOD, LONG/SHORT COURSE SECTIONS, REEL FINGERS NOT NIPPED OFF, REEL ALL STRAIGHT, NICE PLATFORM
- Updated Friday, December 9, 2011 		$25,500 US
Hours: - 		ROANOKE, IL, USA
2005 John Deere 625F - Combine Cutting Platforms
2005 JD 625F PLATFORM, SN 711480, CM, COMPOSITE FINGERS, LOOKS GOOD
- Updated Tuesday, January 24, 2012 		$25,000 US
Hours: - 		CARTHAGE, IL, USA
2009 John Deere 630 - Combine Cutting Platforms
2009 JD 630 PLATFORM SN 730271, CAME OFF 70 SERIES, SPARE KNIFE, COMPOSITE FINGERS, LONG/LONG SECTIONS, INSPECTED THRU SHOP-NEEDS 6 COMPOSITE FINGERS, ONE HYDRA FLEX CYLINDER LEAKING, SOME REEL FINGERS HAVE BEEN CLIPPED
- Updated Monday, August 8, 2011 		$31,000 US
Hours: - 		QUINCY, IL, USA
2004 John Deere 630 - Combine Cutting Platforms
2004 JD 630 HYDRA FLEX PLATFORM, SN 707456, POLY, F/A, SHORT STONE DAM, LONG/SHORT SICKLE-RECENTLY REPLACED
- Updated Thursday, August 25, 2011 		$21,500 US
Hours: - 		LEXINGTON, IL, USA
2008 John Deere 630 - Combine Cutting Platforms
2008 JD 630 PLATFORM, SN 725429, COMPOSITE FINGERS, REEL FINGERS GOOD, AUGER GOOD, PAINT GOOD
- Updated Wednesday, January 25, 2012 		$29,500 US
Hours: - 		QUINCY, IL, USA
2004 John Deere 630 - Combine Cutting Platforms
2004 JD 630F PLATFORM, SN 706511, HIGH STONE DAM, HHS SENSORS, SINGLE POINT, CONTOUR MASTER SENSORS
- Updated Thursday, February 2, 2012 		$19,000 US
Hours: - 		QUINCY, IL, USA
2004 John Deere 630 - Combine Cutting Platforms
2004 JD 630F PLATFORM, Header Height Sensors, Contour Master Sensors, Stubble Lights.
Platform Type: Flexible, Size (feet): 30 - Updated Monday, November 7, 2011 		$18,900 US
Hours: - 		LEXINGTON, IL, USA
2006 John Deere 630 - Combine Cutting Platforms
2006 JD 630 FLEX PLATFORM, SN 716471, CM, COMPOSITE FINGERS, COARSE CUT SICKLE, 650 ACRES ON NEW GUARDS & SECTIONS, GOOD CONDITION, REEL TEETH GOOD, AUGER GOOD
- Updated Tuesday, January 24, 2012 		$22,500 US
Hours: - 		QUINCY, IL, USA
2006 John Deere 630F - Combine Cutting Platforms
2006 JOHN DEERE 630F PLATFORM, FULL FINGER AUGER(COMPOSITE), DAS, FORE/AFT REEL RESUME, LOW STONE DAM, CONTOURMASTER SHAFTS AND SENSORS, LONG/LONG SECTIONS, SINGLE POINT COUPLER
Platform Type: Flexible, Size (feet): 30 - Updated Wednesday, July 21, 2010 		$27,000 US
Hours: - 		ROANOKE, IL, USA
2008 John Deere 630F - Combine Cutting Platforms
2008 JD 630F PLATFORM, SN 725501, COMPOSITE FINGERS, CM, STUBBLE LIGHTS, GOOD CONDITION, NOT AVAIL TIL 9/2012
- Updated Tuesday, January 10, 2012 		$29,500 US
Hours: - 		CARTHAGE, IL, USA
2008 John Deere 630F - Combine Cutting Platforms
2008 JD 630F PLATFORM, SN 726352, FULL FINGER AUGER, COMPOSITE FINGERS, LONG/SHORT SECTIONS, POLY, F/A, DAS, REEL RESUME
- Updated Thursday, July 21, 2011 		$30,500 US
Hours: - 		ROANOKE, IL, USA
2004 John Deere 630F - Combine Cutting Platforms
2004 JD 630F PLATFORM, SN 708108, HYDRA FLEX, HHS & CM SENSORS, SICKLE EXCELLENT
- Updated Sunday, April 10, 2011 		$21,500 US
Hours: - 		LEXINGTON, IL, USA
2010 John Deere 630F - Combine Cutting Platforms
2010 JD 630F PLATFORM, SN 737164, COMPOSITE FINGERS, STUBBLE LIGHTS CM, COURSE SICKLE SECTIONS, LOOKS GOOD, ALWAYS SHEDDED, AVAIL IN JULY
- Updated Thursday, February 2, 2012 		$32,500 US
Hours: - 		CARTHAGE, IL, USA
2010 John Deere 630F - Combine Cutting Platforms
2010 JD 630F PLATFORM, SN 736805, 2 SEASONS USE, LONG/SHORT SECTIONS, STUBBLE LIGHTS, NICE/STRAIGHT/CLEAN, ON LOT NOW
- Updated Friday, December 9, 2011 		$32,500 US
Hours: - 		ROANOKE, IL, USA
2010 John Deere 630F - Combine Cutting Platforms
2010 JD 630F PLATFORM, SN 736804, 2 SEASONS USE, LONG/SHORT SECTIONS, STUBBLE LIGHTS, NICE, STRAIGHT/CLEAN, ON LOT NOW
- Updated Friday, December 9, 2011 		$32,500 US
Hours: - 		ROANOKE, IL, USA
2011 John Deere 635 - Combine Cutting Platforms
2011 JD 635 HYDRA FLEX PLATFORM, SN 742416, USED 1 SEASON, LONG/SHORT SICKLE
- Updated Tuesday, December 27, 2011 		$38,500 US
Hours: - 		LEXINGTON, IL, USA
2006 John Deere 635 - Combine Cutting Platforms
2006 JD 635 PLATFORM, SN 716832, FLEX, FIELD READY, VERY SHARP, COMP AUGER FINGERS, LONG/SHORT SECTIONS LIKE NEW, EXTRA SICKLE, ALL REEL CONTROLS, DAS, SINGLE PT & HEIGHT SENSING, 70 SERIES HOOKUPS
- Updated Friday, January 28, 2011 		$29,500 US
Hours: - 		LEXINGTON, IL, USA
2007 John Deere 635 - Combine Cutting Platforms
2007 JD 635F PLATFORM, SN 721693, SHORT STONE DAM, POLY, F/A, SPARE KNIFE, GOOD CONDITION
- Updated Saturday, August 27, 2011 		$29,500 US
Hours: - 		LEXINGTON, IL, USA
2010 John Deere 635 - Combine Cutting Platforms
2010 JD 635 FLEX PLATFORM, SN 736501, USED 2 SEASONS - 7000 ACRES, COMPOSITE FINGERS, STUBBLE LIGHTS, CM, 70 SERIES
- Updated Thursday, December 29, 2011 		$31,500 US
Hours: - 		ROANOKE, IL, USA
2010 John Deere 635 - Combine Cutting Platforms
2010 JD 635F FLEX PLATFORM, SN 736500, USED 2 SEASONS - 7000 ACRES, COMPOSITE FINGERS, STUBBLE LIGHTS, CM, 70 SERIES
- Updated Thursday, December 29, 2011 		$31,500 US
Hours: - 		ROANOKE, IL, USA
2010 John Deere 635 - Combine Cutting Platforms
2010 JD 635 HYDRA FLEX PLATFORM, SN 736820, COMPOSITE FINGERS
- Updated Tuesday, October 4, 2011 		$36,500 US
Hours: - 		LEXINGTON, IL, USA
2006 John Deere 635 - Combine Cutting Platforms
2006 JD 635F PLATFORM, SN 716298, COMPOSITE FINGERS, LOW STONE DAM, STUBBLE LIGHTS, SHOWING WEAR, REEL IS STRAIGHT, AUGER LOOKS GOOD
- Updated Saturday, October 1, 2011 		$23,000 US
Hours: - 		CARTHAGE, IL, USA
2008 John Deere 635F - Combine Cutting Platforms
2008 JD 635F FLEX PLATFORM, SN 725727, SPARE KNIFE, 1 KNIFE COURSE TOOTH, LONG/SHORT COMPOSITE FINGERS, EVERYTHING STRAIGHT, NICE PLATFORM
- Updated Friday, December 30, 2011 		$32,500 US
Hours: - 		ROANOKE, IL, USA
2007 John Deere 635F - Combine Cutting Platforms
2007 JD 635F PLATFORM, SN 721196, LOW STONE DAM, LONG SHORT SECTIONS, CAME OFF 9870 COMBINE
- Updated Tuesday, November 8, 2011 		$22,000 US
Hours: - 		QUINCY, IL, USA
2010 John Deere 635F - Combine Cutting Platforms
2010 JD 635F PLATFORM, SN 737518, CM, COMPOSITE FINGERS, STUBBLE LIGHTS, LOOKS GOOD, LOW ACRES
- Updated Wednesday, September 7, 2011 		$38,500 US
Hours: - 		CARTHAGE, IL, USA
2005 John Deere 635F - Combine Cutting Platforms
2005 JD 635F FLEX PLATFORM, SN 712192, HHS SENSORS, CM SENSORS, REEL POSITION RESUME SENSORS, HIGH STONE DAM, LONG/SHORT KNIFE SECTIONS, STUBBLE LIGHTS, AND SPARE KNIFE, THE ENTIRE AUGER WAS REPLACED IN JAN 2007 AS WELL AS ALL OTHER PIPS DEERE HAD FOR THESE EARLIER 600F PLATFORMS
- Updated Monday, September 12, 2011 		$25,500 US
Hours: - 		LEXINGTON, IL, USA
2007 John Deere 635F - Combine Cutting Platforms
2007 JD 635F PLATFORM, SN 721041, LOW STONE DAM, LONG SECTIIONS, CAME OFF 9870 COMBINE
- Updated Thursday, February 2, 2012 		$22,000 US
Hours: - 		QUINCY, IL, USA
2007 John Deere 635F - Combine Cutting Platforms
2007 JD 635F PLATFORM, SN 721197, LOW STONE DAM, LONG SHORT SECTIONS, CAME OFF 9870 COMBINE
- Updated Tuesday, November 8, 2011 		$22,000 US
Hours: - 		QUINCY, IL, USA
1990 John Deere 920F - Combine Cutting Platforms
1990 JD 920 FLEX PLATFORM, SN 637370, DAM, NO REEL PARTS, POLY SKIDS
- Updated Wednesday, January 25, 2012 		$6,500 US
Hours: - 		QUINCY, IL, USA
1993 John Deere 925 - Combine Cutting Platforms
1993 925 PLATFORM, SN 652147, LL, DAM, FULL FINGER AUGER
- Updated Wednesday, January 18, 2012 		$6,500 US
Hours: - 		PLEASANT HILL, IL, USA
2003 John Deere 930 - Combine Cutting Platforms
2003 JD 930F PLATFORM, SN 702005, FULL FINGER AUGER (COMPOSITE), ACTIVE HEADER CONTROL, CONTOUR MASTER SENSORS/SHAFTS, DAS, F/A, GOOD POLY, STUBBLE LIGHTS, CONVERTED TO SINGLE POINT
- Updated Saturday, October 15, 2011 		$14,500 US
Hours: - 		ROANOKE, IL, USA
1997 John Deere 930 - Combine Cutting Platforms
1997 JD 930 FLEX PLATFORM SN 671891, FULL FINGER AUGER, STEEL FINGERS, HYD F/A, PTO DRIVE SHAFTS
- Updated Sunday, February 27, 2011 		$11,500 US
Hours: - 		LEXINGTON, IL, USA
1997 John Deere 930 - Combine Cutting Platforms
1997 JD 930 PLATFORM, SN 672523, FLEX, CM, DAM HH, REEL PARTS, WILL HAVE FF CONVERSION, POLY SKIDS, 1 YR ON NEW WOBBLE BOX, REEL TEETH GOOD, POLY SNOUTS, CAME OFF 9610, NICE PLATFORM
- Updated Tuesday, January 24, 2012 		$10,500 US
Hours: - 		QUINCY, IL, USA
2001 John Deere 930 - Combine Cutting Platforms
2001 JD 930F PLATFORM SN 692510 CM, FF AUGER, ACTIVE HH, REEL PARTS, WEDGE KIT REEL TEETH HAVE BEEN SHORTENED
- Updated Thursday, February 17, 2011 		$16,000 US
Hours: - 		QUINCY, IL, USA
2002 John Deere 930 - Combine Cutting Platforms
2002 JD 930F PLATFORM, SN 697029, LL, DAM, REEL PARTS, POLY SKIDS, FF AUGER
- Updated Tuesday, January 24, 2012 		$15,000 US
Hours: - 		QUINCY, IL, USA
2000 John Deere 930F - Combine Cutting Platforms
2000 JD 930F PLATFORM, SN 686718, FULL FINGER AUGER, CM, DAS, POLY SKIDS GOOD, STUBBLE LIGHTS, LOOKS GOOD
- Updated Thursday, September 15, 2011 		$12,900 US
Hours: - 		ROANOKE, IL, USA
1996 John Deere 930F - Combine Cutting Platforms
1996 JD 930 PLATFORM, FULL FINGER, POLY SKIDS, JOHNSON ROCK GUARD, NEEDS SOME REEL FINGERS
- Updated Thursday, February 9, 2012 		$10,500 US
Hours: - 		ROANOKE, IL, USA
2002 John Deere 930F - Combine Cutting Platforms
2002 JOHN DEERE 930F FLEX PLATFORM, DAM, DAS, FORE/AFT, POLY, STUBBLE LIGHTS, LEVEL LAND DRIVESHAFTS
Platform Type: Flexible, Size (feet): 30 - Updated Monday, August 29, 2011 		$13,900 US
Hours: - 		LEXINGTON, IL, USA
2002 John Deere 930F - Combine Cutting Platforms
2002 JD 930F PLATFORM, SN 697445, FULL FINGER, REEL FINGERS CLIPPED, REEL STRAIGHT, COMPOSITE FINGERS IN AUGER CAME OFF 9770 COMBINE, OVERALL GOOD CONDTION
- Updated Tuesday, January 24, 2012 		$14,850 US
Hours: - 		CARTHAGE, IL, USA
John Deere DIVIDERS - Combine Cutting Platforms
1-USED STEEL DIVIDER OFF JD 900 SERIES FLEX PLATFORM, 1-RH ROUGH $125
- Updated Friday, October 14, 2011 		$125 US
Hours: - 		ROANOKE, IL, USA
John Deere DRIVESHAFT CONV KIT - Combine Cutting Platforms
1 - BH84201 DRIVESHAFT CONVERSION KIT
- Updated Tuesday, December 27, 2011 		$500 US
Hours: - 		ROANOKE, IL, USA
2003 Caterpillar F30 - Combine Cutting Platforms
2003 CAT F30 PLATFORM, SN 5YZ01316, FULL FINGER, NEW CRARY CUTTING SYSTEM (GUARDS, SECTIONS, AND HOLD DOWNS) BEFORE THIS SEASON
- Updated Tuesday, December 27, 2011 		$15,000 US
Hours: - 		CARTHAGE, IL, USA
John Deere QUIK-TATCH PLATFORM - Combine Cutting Platforms
JD QUIK-TACH PLATFORM, SN 169019H, NOT 200 MODEL/OLDER, 13', HART-CARTER FLOAT KIT ADDED, HYD ADJ/REEL IS ROUGH-NEEDS BATWING, FINGERS, ETC
- Updated Thursday, July 28, 2011 		$500 US
Hours: - 		ROANOKE, IL, USA