World Map United States / English
Sign In or Register Now
Location Icon
_blank _blank _blank
Other Domries 7' NVT-551

$6,900 US
Located in Ukiah, CA. 7' Domries Disk w/Hydraulic Hoses and Cylinders, Drawn Hitch, Manual Adjust Front Gang Down Pressure, Notched Front Blades w/Finish Blade, Smooth Rear, Rear Hitch Specifications: blades 22" notched or smooth on 9" spacing, 1 1/2" square gang rods, triple sealed bearings, hydraulic cylinder for gang angling. Sizes: 5'6" to 8'6". Weights: 1414 to 1804 pounds. Options: blade cleaners, center shank, 50 or 100 pound weight blocks and add a blade extensions. Features: Designed for disking terraces or on hillsides, the NVT features hydraulic gang angle settings from the tractor seat, for non-stop adjustments. It's low profile allows tillage in the lowest hanging vines or limbs without damage to the crop. All gang frames, main frame, weights, cleaners and linkage are lower than the top of the disk blades. Front gang leveling is quick and easy with turn buckles, for leveling in any ground condition. Square tubes that telescope are mounted on the underside of the rear gangs for a level finish job by the rear gangs. All linkage ends are equipped with press in bushings, wear sleeves and side thrust washers, for low cost in the field replacements
_blank
Size: 7 ft • Kind: Rigid • Spacing: 9" • Hydraulic Hoses & Cylinders • Rear Hitch
Status:
On lot
_blank
_blank
 Other Domries 7'  NVT-551
 Other Domries 7'  NVT-551  Other Domries 7'  NVT-551
_blank _blank _blank _blank _blank
_blank _blank _blank _blank _blank
Additional Information
CategoryTillage
Serial NumberNVT-551
Stock Number11440
_blank
_blank
Equipment Offered By:
Belkorp Ag, LLC
2413 CROWS LANDING RD
MODESTO, CA 95358
USA

BOB SNODGRASS
(209) 538-3831
BROWSE ALL USED EQUIPMENT FOR THIS DEALER
 
CONTACT THE SELLER
Your name:
Your e-mail address:
Please confirm your e-mail address:
Your phone number (optional):
Zip code:
Message:
Your contact preference:
e-mail
phone
_blank
_blank
_blank
back to search results
add to saved equipment
print
_blank
equipment location
_blank